Hydraulic floor prop

Hydraulic floor prop is the multiple award-winning innovation and is intended primarily for use in the construction industry, but also in the mining and shipbuilding industry. Its advantages over classic floor props are numerous. On a construction site, it takes only 30 seconds to set up and just 15 seconds to take down. The whole assembly, height adjustments and disassembly process is so simple that it can be done by a single person in record time.

12.02.2014. Innovation protected by patents (Euro-Asian patent in 2011.). Hydraulic floor prop won the Gold Medal in Geneva, Zagreb, Karlovac and other places.
Petar Kunić

Address: Zagorje 1a, 47242 Krnjak, Croatia
Tel: 00385 (0)99 8417 169
E-mail: petarkunic5@gmail.com


We need:
- Funding / Investor
- Partner for business cooperation
- Technology buyer

 

 

Description

Hydraulic floor prop is the multiple award-winning innovation and is intended primarily for use in the construction industry, but also in the mining and shipbuilding industry. Its advantages over classic floor props are numerous. On a construction site, it takes only 30 seconds to set up and just 15 seconds to take down. The whole assembly, height adjustments and disassembly process is so simple that it can be done by a single person in record time.

This Hydraulic floor prop does not require any special fastening to the objects being held up nor to the base on which it sits. There is neither turning nor other side forces that often cause the old types of floor props to shift out of their intended holding bases, during assembly and disassembly process. This results in highest possible levels of worker safety as well as objects being held up. There is nothing to fix-up or scratching and height adjustments through nuts and bolts assembly that is unavoidable and inherent to existing floor props. It can lift several times heavier masses.
It has stamped measuring scale on the upper tube and integrated measuring tape for mill metric adjustment of height.
It has a lot longer usage life because lifting and proper support that is achieved through nut and bolt adjustments is replaced by a hydraulic system. Nuts and bolts are used only to insure additional stability. A safety valve enables lifting of heavier than recommended masses. In case of a breakdown of the hydraulic system, one is left with ability to use it in a mechanical way. It also has two levels of fine tuning.
Slightly higher cost of production is negligible and especially when one considers it’s much longer usage life, higher quality and exceptional functionality. It is very much possible to make hydraulic floor props for a wide range of height levels and weight support.

O inovatoru – timu

Petar Kunić
I am Petar Kunić, a Croatian inventor with a track record of successful inventions in Croatia and elsewhere, that resulted in global recognition and many prestigious awards.

 

Hidraulicki-podupirac-nacrt

 

 

 

 

Kako ti se dopada ovaj projekt?

Ocjeni i pomogni nam pri izboru najboljih projekata i ideja u Hrvatskoj! 

 

Ocjeni
VN:F [1.9.22_1171]
Rating: 8.0/10 (1 vote cast)

 

Lajkaj i podijeli

http://en.genius-croatia.com/wp-content/uploads/2014/02/Hidraulicni-podupirac-150x150.pngDigg ThisShare via emailSubmit to redditSubmit to StumbleUponShare on Tumblr
Hydraulic floor prop , 8.0 out of 10 based on 1 rating

Menu